Group Call Pickup - Matrix Sparsh VP110 User Manual

You can configure a programmable key as directed pickup key via web user interface only. Relevant
instructions to do that have been mentioned above. You can pick up a call by pressing the directed pickup
key directly.

Group Call Pickup

Group call pickup is used for picking up incoming calls within a pre-defined group. If the group receives many
incoming calls at once, the user will pick up the first incoming call, using a group pickup key or the GPickup soft key.
This feature depends on support from a SIP server. For many SIP servers, group call pickup requires a group
pickup code, which can be configured on a phone.
Procedure
Group call pickup can be configured using the configuration files or locally.
Configuration File
Local
To configure a group call pickup key via web user interface:
• Click on DSS Key-> Programmable Key.
• In the desired DSS key field, select Group Pickup from the Type list.
• Enter the group call pickup code in the Value field.
• Click Confirm to save the change.
182
<MAC>.cfg
<MAC>.cfg
Web User Interface
Configure group call pickup feature on
a phone basis.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Assign a group call pickup key.
For more information, refer
"Appendix D ‐ Configuration
Parameters".
Assign a group call pickup key.
Navigate to:
http://<phoneIPAddress>/
servlet?p=dsskey&q=load&model=0
Configure group call pickup feature on
a phone basis.
Navigate to:
http://<phoneIPAddress>/
servlet?p=features‐callpickup&q=load
Matrix SPARSH VP110 User Guide