Matrix Sparsh VP110 User Manual page 290

• (Optional.) If you click DHCP, you can configure the static DNS address in the corresponding fields.
• Click Confirm to save the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
• Click OK to reboot the IP phone.
To configure IPv6 address assignment method via phone user interface:
• Press Menu->Settings->Advanced Settings (password: 1234) ->Network->WAN Port.
• Press
or
• Press or
• Press or
• If you select the Static IPv6 Client, configure the IPv6 address and other network parameters in the
corresponding fields.
• Press the Save soft key to save the change.
The IP phone reboots automatically to make settings effective after a period of time.
282
to select IPv4&IPv6 or IPv6 from the IP Mode field.
to highlight IPv6 and press the Enter soft key.
to select the desired IPv6 address assignment method.
Matrix SPARSH VP110 User Guide