Answering Calls - Matrix Sparsh VP110 User Manual

To place a call using the headset:
• With the optional headset connected, press
• Enter the desired number using the keypad.
• Press OK ,
To permanently enable your headset, refer
To place multiple calls:
You can have more than one call on your IP phone. To place a new call during an active call:
• Press the Hold soft key to place the original call on hold.
• Press the NewCall soft key.
• Enter the desired number using the keypad.
• Press OK ,
You can press or
call.

Answering Calls

When you are not in another call, you can answer a call in three ways:
• Using the handset
• Using the speakerphone
• Using the headset
• You can ignore incoming calls by pressing the Reject soft key or the Silence soft key. You can also
activate Do Not Disturb mode to ignore all incoming calls without ring on your phone. For more
information, refer
• You can forward incoming calls to someone else by pressing the Fwd soft key. For more information,
refer "Call Forward".
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
• Pick up the handset.
Matrix SPARSH VP110 User Guide
, or the Send soft key.
, or the Send soft key.
to switch between the calls, and then press the Resume soft key to retrieve the desired
"Do Not Disturb".
to activate the headset mode.
"Headset Prior".
137