Matrix Sparsh VP110 User Manual page 258

UnMute
Missed Call
IP Changed
Forward Incoming Call
Reject Incoming Call
Answer New-In Call
Transfer Finished
Transfer Failed
Idle To Busy
Busy To Idle
An HTTP or HTTPS GET request may contain variable name and variable value, separated by "=". Each variable
value starts with $ in the query part of the URL. The valid URL format is: http(s)://IP address of server/
help.xml?variable name=$variable. Variable name can be customized by users, while the variable value is pre-
defined. For example, a URL "http://192.168.1.10/help.xml?mac=$mac" is specified for the event Mute, $mac will
be dynamically replaced with the MAC address of the IP phone when the IP phone mutes a call.
The following table lists pre-defined variable values.
Variable Value
$mac
$ip
$model
$firmware
$active_url
$active_user
$active_host
$local
250
When the IP phone un‐mutes a call.
When the IP phone misses a call.
When the IP address of the IP phone changes.
When the IP phone forwards an incoming call.
When the IP phone rejects an incoming call.
When the IP phone answers a new call.
When the IP phone completes to transfer a call.
When the IP phone fails to transfer a call.
When the state of the IP phone changes from idle to busy.
When the state of phone changes from busy to idle.
The MAC address of the IP phone
The IP address of the IP phone
The IP phone model
The firmware version of the IP phone
The SIP URI of the current account when the IP phone places a call,
receives an incoming call or establishes a call.
The user part of the SIP URI for the current account when the IP phone
places a call, receives an incoming call or establishes a call.
The host part of the SIP URI for the current account when the IP phone
places a call, receives an incoming call or establishes a call.
The SIP URI of the caller when the IP phone places a call.
The SIP URI of the callee when the IP phone receives an incoming call.
Description
Matrix SPARSH VP110 User Guide