Upgrading Firmware - Matrix Sparsh VP110 User Manual

Default Value
Range
Example
PC Port Mode
Parameter-
network.PC_port.enable
Description
Format
Default Value
Range
Example

Upgrading Firmware

Parameter-
firmware.url
Description
Format
Default Value
Range
Example
Matrix SPARSH VP110 User Guide
0
Valid values are:
0‐Auto negotiate
1‐Full duplex, 10Mbps
2‐Full duplex, 100Mbps
3‐Half duplex, 10Mbps
4‐Half duplex, 100Mbps
network.pc_port.speed_duplex = 0
Configuration File
<MAC>.cfg
Enables or disables the PC port.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
Boolean
1
Valid values are:
0‐Disabled
1‐Auto Negotiation
network.PC_port.enable = 1
Configuration File
<MAC>.cfg
Configures the access URL of firmware.
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
URL
Blank
String within 511 characters
firmware.url = http://192.168.1.20/2.72.0.1.rom
361