Matrix Sparsh VP110 User Manual page 420

Example
Parameter-
features.dtmf.hide_delay
Description
Format
Default Value
Range
Example
Transfer via DTMF
Parameter-
features.dtmf.replace_tran
Description
Format
Default Value
Range
Example
412
features.dtmf.hide = 1
Configuration File
<MAC>.cfg
Enables or disables the IP phone to display the DTMF
digits for a short period before displaying asterisks.
Note: It works only if the parameter
"features.dtmf.hide" is set to 1 (Enabled).
Boolean
0
Valid values are:
0‐Disabled
1‐Enabled
features.dtmf.hide_delay = 1
Configuration File
<MAC>.cfg
Enables or disables transfer via DTMF feature.
If it is set to 0 (Disabled), the IP phone will perform
the transfer as normal when pressing the transfer key
during a call.
If it is set to 1 (Enabled), the IP phone will transmit the
specified DTMF digits to the server for completing call
transfer when pressing the transfer key during a call.
Boolean
0
Valid values are:
0‐Disabled
1‐Enabled
features.dtmf.replace_tran = 1
Matrix SPARSH VP110 User Guide