Entering The Department Id And Password; Operations After Turning The Power On - Canon imageCLASS 2200 Reference Manual

Entering the Department ID and Password

When Department ID Management has been set, the Department ID and Password must be
1
entered before operating this machine.
NOTE
•
When you are using the control card, the message <Y ou must insert a control card.> appears in the
touch panel display. Insert the control card into the card slot. (See 'Card Reader-C1,' on p. 7-82.)

Operations After Turning the Power On

After turning the power on and the machine becomes ready to scan, the screen for entering
the Department ID and Password appears.
NOTE
•
For details of how to turn the power on, see 'Main Power and Control Panel Power,' on p. 1-23.
1
1-36

Entering the Department ID and Password

Press "Department ID" and enter the department ID, then press
"Password" and enter the password, using the
keys).
If the Password is not set, proceed to step 2.
NOTE
•
If you made a mistake when entering the Department ID or Password, press
enter the correct value.
(numeric
-
(Clear), and