Radiator Aluminum And Radiator Install - Factory Five Racing GTM Supercar Assembly Manual

Radiator Aluminum and Radiator Install


Eye protection, drill w/#6 hex nut driver, ⅛" drill bits, drill, rivet gun, silicone, caulking gun, #6
self tapping screws.

Radiator aluminum rear duct and under tray (FFR# 25495, 25493).
The radiator aluminum has to be installed before the radiator and coolant overflow container are installed.
The under tray aluminum piece is installed first. The lip on the front of this piece is located at the front of
the vehicle and oriented upwards. Do not rivet the rearward flange which is attached to the ¾" horizontal
frame rail until the next step.
299
www.factoryfive.com 508-291-3443