Engine Installation - Factory Five Racing GTM Supercar Assembly Manual

When installing the engine it is a good idea to have at least one person assisting you, two is preferred.
Before the engine is installed, remove the thermostat housing (10mm wrench) as it aids in the installation.
The engine is installed with the engine mounts and rubber isolators mounted to the engine itself.

Engine Installation

Attach the chain to the engine as low as possible, leaving as little slack at the top. Be careful that the chain
does not apply pressure to the fuel lines or coil packs. When lowering the engine, rotate the engine
slightly (to clear the rear X-member).
261
www.factoryfive.com 508-291-3443