Table of Contents
Advertisement
The master cylinders have 2 openings; the upper outlet is used as a bleeder to bleed the master cylinders
themselves. The front facing opening is used to plumb brake lines. One of the cylinders is used for the
front brakes and the other is used for rear brakes. Insert the adapter fitting (
3
/
-24 THD to
3
/
" tube
8
16
inverted male flare, found in the Wilwood cylinder kit) into the front opening of the master cylinders.
Plumb the front brakes first. Thread the male end of the brake line "T" adapter (FFR# 25507) into the
adapter previously installed into the master cylinder. It is your choice on which master cylinder to use for
the front/rear brakes because they have an identical bore size.
286
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
