Table of Contents
Advertisement
On a piece of masking tape, draw one horizontal line on the wall at a height exactly 2 inches lower than
Measurement A.
On the line, make vertical marks both to the right and left of the vehicle centerline mark at the distance of
Measurement B from the vehicle centerline vertical line.
Turn the headlights on and adjust the vertical aim of the headlights so that the top horizontal cutoff of
each of the beams is located along the horizontal line drawn on the wall.
Adjust the horizontal aim of the low beam headlights so that the point at which the top cutoff of the beam
begins to slope upwards is located at the vertical marks.
722
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
