Table of Contents
Advertisement
Once all the universal joints and bearing retainer bolts are loosely installed, make sure the linkage does
not bind and the steering system is functional. You can test the telescoping function of the column for any
binding by hooking a test lead to the positive side of a battery (or a jumper box or battery charger) then to
one pole on the motor plug, and a test lead to the negative side of the battery then to the other pole on the
motor plug. Switch the connections at the plug to move the column in the opposite direction. Once you
are sure the steering and telescoping ability are both free of any binding, tighten all the Hex set screws
and then tighten the ½" nuts to lock the set screws in place on the universals. Tighten the Steering
Column Bolts.
Pedal Box and Master Cylinders
Eye protection, drill,
Pedal box and hardware (FFR# 25225, 25375).
25
/
" drill bit, drill, ½",
64
www.factoryfive.com
7
/
" wrench,
3
/
" Hex key, rivnut tool.
16
16
251
508-291-3443
Advertisement
Table of Contents
