Diffuser
Drill,
3
/
",
5
/
" drill bit, rivet tool, clamps, measuring tape, marker.
16
16
Secondary body fasteners, Rear Diffuser.
Raise the diffuser up to the chassis with a jack for fitment so that the Diffuser is sitting against the frame
but can still be moved around. The upward bend in the diffuser starts just behind the ends of the chassis
tubes.
The most important visible alignment of this panel is the rear edge that sticks out past the body. Measure
and make sure this edge is even (~1.25") all of the way across.
467
www.factoryfive.com
508-291-3443