Hood Release Handle And Cables - Factory Five Racing GTM Supercar Assembly Manual

Hood Release Handle and Cables


Phillips screwdriver, T-15 Torx.

Hood Release Handle and Cables, screws, Latches.
Unscrew the 2 screws at the front of the handle (Phillips screwdriver).
Unscrew the 1 screw behind the handle (Pull handle to gain access) (T-15).
Unbolt the hood latches. Remove the cables from the latch – make sure to label them! To remove the
cable, relieve the tension on the cable by pulling the arm in, then, remove the cable (See picture).
108
www.factoryfive.com 508-291-3443