On the nose, drill a ¼" hole in the center of the light template for the fog light wires to go through.
Drill the two mounting holes using a ¼" drill bit.
Remove the remains of the template and push the wires through the center hole.
Mount the fog light using ¼" flange head screws.
Connect the Fog lights to the fog light wires.
Headlight wiring
Wire the front lights into the chassis harness, using the chassis wire from the fan to power the driving
lights.
Strip the insulation off one of the wires running to the headlight.
Slide the rubber seal over the exposed wire.
629
www.factoryfive.com
508-291-3443