Table of Contents
Advertisement
The heater hoses are installed next. Snake the long ⅝" (FFR# 25537), ¾" (FFR# 11205) and ¼" (FFR#
25536) radiator hose down the tunnel through the lower portion of the Dash bulkhead X member.
The heater ports on the water pump are different sizes. Connect the larger heater hose (¾") to the larger
port on the water pump (front) and the smaller heater hose (
5
") to the smaller port on the water pump
/8
(rear). Attach these hoses onto the water pump with the large heater hose clamps (FFR# 25601).
311
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
