Factory Five Racing GTM Supercar Assembly Manual page 297

Insert the Corvette soft brake line into the brake line bracket from the bottom and hold it in place using
the clip found on the Corvette. The brake line metric adapter (FFR# 25502) is then inserted into the
opening in the Corvette Brake line fitting. (same procedure used on driver and passenger side)
Plumb the driver side front brake line first using the 20" brake line (FFR# 13740) starting at the brake
caliper and working towards the master cylinder. The pre-flared brake line has a long and a short brake
line fitting from the factory. The shorter end gets installed at the caliper side to give clearance for the
upper control arm.
288
www.factoryfive.com 508-291-3443