Factory Five Racing GTM Supercar Assembly Manual page 256

Install the ¾" Pillow Block Bearing on the 9"x ¾"DD shaft. Once the Pedal Box is mounted and you
have installed the brake light switch bracket, you will be able to mount this bearing, but for now leave just
leave the bearing on the shaft.
Slide the 9"x ¾" DD shaft into the ¾" DD to ¾" DD universal joint. If needed, you can slide the steering
column forward/back since it is not fully tightened yet to make this step easier.
247
www.factoryfive.com 508-291-3443