Table of Contents
Advertisement
(Optional) Telescoping Column
7
/
", ½",
9
/
" wrench,
16
16
Steering shaft, steering system hardware, Telescoping Steering Column adapter Assembly (FFR#
25545, 26022, 25743, 25892).
Cut 1
7
/
" off of the 9" long x ¾" DD shaft (FFR# 25523). Remove any burs from cutting on both shafts as
8
even a slight bur will make it very difficult to fit the shaft in the universal joint or hollow DD shaft.
Drill a
3
/
" hole through the 1
8
Insert the supplied spacer (FFR# 25866) into the lower end of the Corvette shaft, lining up the holes.
Insert the 1
7
/
" x ¾" DD shaft into the lower portion of the Corvette lower shaft. Using a screwdriver or a
8
punch to hold the spacer in place helps to keep the holes lined up.
5
/
",
3
/
",
5
/
", 4mm Hex keys, ⅛",
32
16
16
7
/
" long shaft 1.25" in from one end on the flat surface of the shaft.
8
www.factoryfive.com
3
/
" drill bits, drill,
16
241
508-291-3443
5
/
" punch, hammer.
32
Advertisement
Table of Contents
