Clutch Line Routing
Drill,
3
/
",
7
/
", ½" wrenchs, 7 mm wrench, 14 mm wrench.
8
16
Clutch Slave Cylinder Kit (FFR# 25564), Wilwood Master Cylinder (FFR# 25227).
Use the same procedure as the brake master cylinders to install the third clutch Master Cylinder.
Use the same procedure as the rear brake lines to plumb the hard line for the Clutch Slave Cylinder
(installed in the Transmission Installation section) along the same path as the rear brake lines.
If installing a Mendeola Transaxle, route the clutch line down the Passenger side of the engine
bay, the cylinder is on the opposite side compared to a Porsche transaxle.
294
www.factoryfive.com
508-291-3443