Table of Contents
Advertisement
Wrap the cover around the roll bar starting with the top edge, then wrap the other end around the bar in a
clockwise motion. The cut edge should be in an area that will be hidden once the body is on (near the top
and towards the front). The two tabs will wrap around the front bend of the side bar (the top of the A-
pillar).
Work your way across the front cross bar to the passenger side, taping the material in place as needed
with the low-tack tape. The material may tend to twist as you wrap it. This is not a problem as long as
the cut edge remains in an area that will be covered once the body is on and the material does not wrinkle.
547
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
