Factory Five Racing GTM Supercar Assembly Manual page 278

Put the Corvette Idler Pulley on the sleeve followed by a ½" washer (FFR# 13976), and nylon lock nut
(FFR# 10834). Tighten the lock nut, checking that the pulley moves freely.
Unbolt the Tensioner from the engine block (13 mm). Save the Tensioner and bolts.
Mount the supplied Tensioner Bracket (FFR# 25360) to the engine block using the Corvette tensioner
bolts.
269
www.factoryfive.com 508-291-3443