Factory Five Racing GTM Supercar Assembly Manual page 472

Open the hatch.
Center and locate the striker mount bracket on the hatch and mark the mounting holes.
Drill and install rivnuts at the locations marked.
Attach the striker mount to the hatch using the ¼"-20 x ¾" flanged button head screws.
Attach the shoulder bolt to the center of the striker mount hole.
Close the hatch so it is flush with the body.
From the underside of the body, mark the center location of the shoulder bolt on the hatch latch area.
Open the hatch and extend the lines out so that they can be seen around the latch template.
463
www.factoryfive.com 508-291-3443