Table of Contents
Advertisement
Cockpit Side Wall (Upper)
Super 77 Spray Adhesive, scissors.
Interior Vinyl parts
Work carefully and most importantly TAKE YOUR TIME! You do not want to have wrinkles in
the vinyl and you want to be sure that the vinyl adheres tightly to the bends in the aluminum.
Before applying the vinyl to the cockpit side wall panels, you may have to cut a relief in the panel to
allow it to bend slightly around the top of the door latch bracket. Hold the panel in place and mark the
location for the cut and trim a small section from the rear flange (see photo).
As with the previous panels, slice and/or trim the vinyl in the necessary locations so the vinyl fits tightly
around the panel and does not overlap it self once you have done so.
Spray the side wall panels with the adhesive and apply the vinyl. On the driver side, make sure the rear
hatch handle cutout in the vinyl lines up with the cutout in the aluminum panel.
578
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
