Table of Contents
Advertisement
The front brake line bracket is installed below the rear upper control arms (on the rear leg of the control
arm) and fastened with upper control arm hardware. The smaller index faces the inside of the car. The
Corvette used a washer/spacer in between the control arm and the frame. This washer is now the nut side
of the upper control arm bolts before the supplied 10mm locknut (FFR# 25376). Torque to the
specification listed in the Appendix (15mm – bolt head) (same procedure used on driver and passenger
side).
220
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
