Horn Assembly - Factory Five Racing GTM Supercar Assembly Manual

Disconnect the fan motor electrical plugs and remove the wires/wire looms from the shroud assembly.
Although the radiator and fan shroud assembly can be removed as one piece, if there is not enough
room to do so, pull the fan shroud assembly out of the retaining slots on the radiator.
Save the condenser radiator and fan shroud assembly (fans, motors, shroud), A/C Pressure Switch.

Horn Assembly


13 mm socket, ratchet.

Horn Assembly.
Remove the passenger side front fascia lower closeout panel.
Leaving the horn assembly electrical plug in place, snip the wires, leaving enough room to splice the
connection into the chassis wiring harness supplied with the kit.
Unbolt the assembly from the skid bar (13 mm). Save the horn assembly, and wiring section with the
plug.
30
www.factoryfive.com 508-291-3443