Table of Contents
Advertisement
Tape off or conceal any wiring that could possibly get the spray adhesive on it.
Lift up the bottom edge of the vinyl in the footbox.
Spray both the aluminum (only the lower inside wall for now) and the backing of the vinyl with Super 77.
Wait a minute or two to allow the adhesive to tack up, and then lower the vinyl onto the aluminum
making sure that the material does not wrinkle. Smooth the material over the aluminum. Make sure that
the vinyl fits tightly in/over any bends in the aluminum.
572
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
