Factory Five Racing GTM Supercar Assembly Manual page 60

Using a 15 mm socket, take the tension off of the accessory belt and remove.
Remove the power steering pulley to gain access to the power steering pump bolts. To do this you will
need a puller – if you do not own one, you can rent one from almost any auto parts store. If you cannot
prevent the outer wrench from turning while you turn the inner wrench and the wrench is long enough,
you can use the engine cross member to brace the wrench while you turn the inner wrench (See
pictures below).
Power Steering Pulley Removal
51
www.factoryfive.com 508-291-3443