Table of Contents
Advertisement
The front radiator opening mesh and can be fit by hand to the opening. Hold it in place from the back and
wrap the edges around the back side of the opening. If the mesh does not sit flush, sand the edge of the
opening to fit.
Hood Preparation
Drill, 2
3
/
", 3.5" hole saw,
8
is recommended), paint marker
25
/
", ¼",
5
",
1
/
" drill bit, screw driver, reciprocating saw (air powered
/
64
16
8
512
www.factoryfive.com
508-291-3443
Advertisement
Table of Contents
