Factory Five Racing GTM Supercar Assembly Manual page 254

Slide the flange bearing and bearing retainers (FFR# 12640) on the long/upper steering shaft. The Hex set
screw on the bearing should be on the shaft side of the bearing, not the joint side.
Install the shaft assembly in the chassis from the cockpit side, carefully snaking the joints and shaft
through the lowest hole on the 1 / " pedal box mounting plate.
16
Attach the lower universal joint to the steering rack. align the Hex set screw with the groove on the input
shaft on the steering rack. Leave the set screw loose.
Using the supplied 5 / " hardware, loosely fasten the bearing's mounting flange to the 1 / " steel pedal box
16 16
mounting plate.
245
www.factoryfive.com 508-291-3443