Wiring, Computer, Fuse Panel - Factory Five Racing GTM Supercar Assembly Manual

Wiring, Computer, Fuse Panel


7, 10 mm socket,

Computer, TAC Module, Computer Brackets, Wiring, Body Control Module, Fuse Panels.
Remove the rear compartment wiring and grounds from all clips, speakers and the roof bow if you
haven't done so already.
Unbolt antenna module (7 mm), grounds – driver and passenger side (10 mm).
Remove all electrical connections and retaining clips along the floor board, and grounds at the hinge
pillars (10 mm).
Remove the upper windshield trim and sun visors. Remove the wiring and grounds from the
windshield bow.
Under the passenger kick panel, unclip the Body Control Module (BCM) and the 3 electrical
connections.
Unbolt the interior fuse panel (7 mm) and remove.
Unclip the diagnostic port.
9 " socket and extension or deep
/32
www.factoryfive.com
9 " socket.
/32
122
508-291-3443