Cisco TelePresence System 3200 Use & Care Manual page 80

Hide thumbs Also See for TelePresence System 3200:
Table of Contents

Advertisement

Parts List
Step 10
Attach the left Table segment.
a.
b.
c.
d.
Figure 6-10
Left Table segment
The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top.
Note
Cisco TelePresence System 3200
6-12
The draw bolts have two halves that screw into a center piece.
While a draw bolt is being tightened, hold the table edges together to avoid damage to the draw bolt
or the table segment.
Tighten the draw bolts so the two table segments are connected snugly.
While one person is tightening the draw bolts from below, it is important for the support person to
maintain the alignment of the table segment edges.
7
12
10
Chapter 6
6
Building the First Row Table Assembly
OL-14521-01

Advertisement

Table of Contents
loading

Table of Contents