Other Devices - Cisco TelePresence System 3200 Use & Care Manual

Setting Up CTS Components

Other Devices

Use Other Devices to check the Auxiliary Control Unit, which controls the individual light units
surrounding the displays in CTS conference rooms and enables the CTS to get more complete projector
status information and to restores projector defaults.
•
•
Cisco TelePresence System 3200
10-18
Click Other Devices on the Hardware Setup window.
Click the Start radio button to access the Auxiliary Control Unit to begin testing. To end the test,
click Stop.
Individual light units correspond to the five port numbers of the Auxiliary Control Unit. Click
–
the appropriate box to select a specific port number; Click Select All to select all ports (and all
light units) or Select None.
Click the Refresh On/Off Status button to update the on/off status of each port.
–
Click the Turn Selected Lights On/Off to test the selected light unit(s).
–
Click the Reset Auxiliary Control Unit to power cycle the Auxiliary Control Unit.
–
Chapter 10 First-Time Setup
OL-14521-01