Cisco TelePresence System 3200 Use & Care Manual page 14

Tools and Equipment List
• Large Phillips screwdriver
Tin snips*
•
Pallet jack or hand cart (for moving component boxes to installation site)*
•
Safety gloves*
•
Safety glasses*
•
Box cutters*
•
Cisco TelePresence System 3200 Structure, Accessory, and Adjustment Assembly:
Power screwdriver with 3, 4, 5, and 6 mm (standard or round) Allen bits, or standard 3, 4, 5, and
•
6 mm Allen wrenches
Tip
Manual screwdrivers, #2 and #4 Phillips and flathead types
•
Metric wrenches, 10 to 15 mm
•
9/64-inch Allen wrench (included with speakers)
•
Tape measure
•
Level
•
Masking tape*
•
Tie wraps*
•
Knee pads or kneeling cushion*
•
Laptop computer attached to network (for troubleshooting or reference)*
•
• Hand vacuum or facilities vacuum*
• Stepladder*
• 10mm open end ratcheting wrench**
Mechanical lift (optional, for hanging display screens)
•
* Recommended for best results
**Useful for securing the draw bolts between table sections
Cisco TelePresence System 3200
1-4
A round-head Allen bit can work at an angle instead of just straight out, a helpful feature in tight
spots.
Chapter 1 Overview
OL-14521-01