Removing The Camera Cluster; Removing The Left Door; Removing A Display Shelf - Cisco TelePresence System 3200 Use & Care Manual

Replacing a Plasma Display—Part Number CTS-DISP-65-GEN2

Removing the Camera Cluster

If you are replacing the center Plasma display, you must remove the camera cluster. Refer to the previous
section,

Removing the Left Door

The left tabletop door section must be removed to allow room to move the Plasma displays in and out of
the work area.
Note Make sure to retain all screws, connectors, and other parts during the disassembly.
Step 1 Remove the safety straps from the underside of the left tabletop section.
Unscrew one side of the hinges connecting the left tabletop wing section to the left Table segment.
Step 2
Remove the left tabletop wing section and set it aside.
Step 3

Removing a Display Shelf

Make sure to retain all screws, connectors, and other parts during the disassembly.
Note
Unscrew the left Accessory cabinet from the left Accessory cabinet attachment bracket. Remove the
Step 1
Accessory cabinet from the work area.
From the underside of the left Display shelf, unscrew one side of each metal plate connector.
Step 2
Loosen each draw bolt.
Step 3
Unscrew the left Display shelf from the two Display Shelf support brackets.
Step 4
Pull the left Display shelf away from the center Display shelf and set aside.
Step 5
If you are replacing the left Plasma display, skip to the next section,
Step 6
Completing the
If you are replacing the center or right Plasma display, repeat
Step 7
shelf section.
If you are replacing the center Plasma display, skip to the next section,
Step 8
and Completing the
If you are replacing the right Plasma display, unscrew the right Accessory cabinet from the right
Step 9
Accessory cabinet.
Place the Accessory cabinet under the right Tabletop wing segment to support it.
Step 10
Unscrew the right Tabletop wing segment from the Accessory cabinet attachment bracket.
Step 11
Unscrew the right Display shelf from the two Display Shelf support brackets. Set aside the Display shelf.
Step 12
Cisco TelePresence System 3200
12-6
Removing and Replacing the Camera Cluster
Procedure".
Procedure".
Chapter 12 Field-Replaceable Unit Guide
for this procedure.
"Removing the Display Screen and
Step 2 through Step 5
"Removing the Display Screen
for the center display
OL-14521-01