Chapter 1 Overview; Overview Chapter Organization - Cisco TelePresence System 3200 Use & Care Manual

Overview
Revised: July 28, 2008, OL-14521-01
Chapter Organization
Chapter 1, "Overview"
•
Chapter 2, "Building the Display Assembly"
•
•
•
•
Chapter 3, "Mounting and Leveling the Plasma Displays"
•
Chapter 4, "Building the Lighting Assembly"
•
Chapter 5, "Building the Display Shelf Assembly"
•
Chapter 6, "Building the First Row Table Assembly"
•
OL-14521-01
(this chapter)
Provides chapter organization and content of this document and an overview of the steps you
perform to install a CTS-3200 system.
The steps for assembling the three Display structures, connecting them, and positioning them in the
conference room are described in a series of illustrations.
Each illustration builds upon the previous illustration to describe the complete process of building
the Display assembly.
Each illustration is keyed numerically to the Chapter Parts List, appearing at the beginning of the
chapter. You can refer to the Parts List to identify the specific fastener or bracket being used in an
illustration.
Additional information may appear below each illustration.
This chapter uses illustrations to describe the leveling alignment points and the processes used to
level the plasma displays. This chapter is organized the same as Chapter 2.
This chapter describes the procedures used to build the lighting assembly and is organized the same
as Chapter 2.
This chapter describes how to build the display shelf assembly and is organized the same as Chapter
2.
This chapter describes the procedure to build the first row table and is organized the same as Chapter
2.
1
C H A P T E R
Cisco TelePresence System 3200
1-1