Cisco TelePresence System 3200 Use & Care Manual page 161

Chapter 9 Routing Power and Signal Cables
Step 5 Route the signal cables for the first row microphones, Cisco Unified IP Phone, and (if required) Ethernet
connections in the first row table.
Figure 9-5 Table assembly Signal Cable Routing
5
5
4
3
The Table Leg Signal cables are routed behind the Display structure, along with the other signal cables,
Note
but do not plug into any Codec.
OL-14521-01
Table Leg Signal
IP Phone Signal
Microphone Signal
Projector Signal
VGA Peripheral
Cisco TelePresence System 3200
Parts List
9-7