Cleaning The Camera Lens; Maintaining The Projector - Cisco TelePresence System 3200 Use & Care Manual

Cleaning the Camera lens

Cleaning the Camera lens
Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry
Caution
microfiber cloth. After cleaning, you will need to realign the camera.

Maintaining the Projector

Note Refer to the Projector User Guide included with your projector for maintenance issues such as cleaning
the projector lens. To replace the projector lamp, see the
CTS-PRJTR-BL-GEN1" section on page
Projector—Part Number CTS-PRJTR-GEN1" section on page
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Warning Installation of the equipment must comply with local and national electrical codes.
Cisco TelePresence System 3200
11-2
"Replacing the Projector Lamp—Part Number
12-17. To replace the projector, see the
12-18.
Chapter 11 Use & Care Guide
"Replacing the
OL-14521-01