Specifying An Ipp Authentication Password - Ricoh 920F Operating Instructions Manual

6. Re-enter the PDF Group password, and then press the [OK] key.
7. Press the [Escape] key two times.
8. Press the [User Tools/Counter] key.
• The machine administrator must give users the group password for PDF files that are already registered
on the machine. The users can then register it in DeskTopBinder on their computers. For details, see
DeskTopBinder Help.
• Be sure to enter the same character string as that specified on the machine for the group password
for PDF files.
• The group password for PDF files can also be specified using Web Image Monitor. For details, see
Web Image Monitor Help.
• p.32 "Logging on Using Administrator Authentication"
• p.33 "Logging off Using Administrator Authentication"

Specifying an IPP Authentication Password

This can be specified by the network administrator.
Specify the IPP authentication passwords for the machine using Web Image Monitor.
By making this setting, you can encrypt IPP authentication passwords for transmission to prevent them from
being analyzed.
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
3. Click [Login].
The network administrator can log on. Enter the login user name and login password.
4. Click [Configuration] under "Security", and then click [IPP Authentication].
The "IPP Authentication" page appears.
Encrypting Transmitted Passwords
7
179