Wins - Ricoh 3406WD Setting Manual

4. Monitoring and Configuring the Machine
miccheck {on|off}
• p.35 "Wireless LAN"
4

wins

Use the "wins" command to configure the WINS server settings.
Viewing settings
msh> wins
• If the IPv4 address obtained from DHCP differs from the WINS IPv4 address, the DHCP address
is the valid address.
Configuration
msh> wins "interface_name" {on|off}
• {on} means "active" and {off} means "inactive".
• Be sure to specify the interface.
• wlan can be specified only when the IEEE 802.11 interface is installed.
ether
wlan
Address configuration
Use the following command to configure a WINS server IP address:
msh> wins "interface_name" {primary|secondary} "IP address"
• Use the "primary" command to configure the primary WINS server IP address.
• Use the "secondary" command to configure the secondary WINS server IP address.
• Do not use "255.255.255.255" as the IP address.
168
Parameter
Interface name
Value configured
You can enable or disable the MIC check
function.
The default setting is "On" (enabled).
If you specify "Off", you cannot perform MIC
checks. We recommend you specify "On" for the
MIC check function when using this machine.
Interface configured
Ethernet interface
IEEE 802.11 interface