Show Port Monitor - Edge-Core ES3510MA-DC Management Manual

This command displays mirror information.

show port monitor

S
D
Shows all sessions.
C
Privileged Exec
C
This command displays the currently configured source port, destination
port, and mirror mode (i.e., RX, TX, RX/TX).
E
The following shows mirroring configured from port 6 to port 5:
YNTAX
show port monitor [interface | vlan vlan-id |
mac-address mac-address]
interface - ethernet unit/port (source port)
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
vlan-id - VLAN ID (Range: 1-4093)
mac-address - MAC address in the form of xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxx.
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
XAMPLE
Console(config)#interface ethernet 1/5
Console(config-if)#port monitor ethernet 1/6
Console(config-if)#end
Console#show port monitor
Port Mirroring
-------------------------------------
Destination Port (listen port):Eth1/5
Source Port (monitored port)
Mode
Console#
– 753 –
| Port Mirroring Commands
C 29
HAPTER
Local Port Mirroring Commands
:Eth1/6
:RX/TX