Port Security Mac-Address-As-Permanent; Show Port Security - Edge-Core ECS3510-10PD Management Manual

port security
mac-address-as-
permanent

show port security

E
XAMPLE
The following example enables port security for port 5, and sets the
response to a security violation to issue a trap message:
Console(config)#interface ethernet 1/5
Console(config-if)#port security action trap
R C
ELATED OMMANDS
show interfaces status (993)
shutdown (988)
mac-address-table static (1066)
Use this command to save the MAC addresses that port security has
learned as static entries.
S
YNTAX
port security mac-address-as-permanent [interface interface]
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-10)
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
This example shows the switch saving the MAC addresses learned by port
security on ethernet port 1/3.
Console#port security mac-address-as-permanent interface ethernet 1/3
Console#
This command displays port security status and the secure address count.
S
YNTAX
show port security [interface interface]
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-10)
– 883 –
| General Security Measures
C 24
HAPTER
Port Security