Show Port Security; Table 51: Show Port Security - Display Description - Edge-Core ECS2100-10T Reference Manual

Related Commands
show interfaces status (364)
shutdown (356)
mac-address-table static (424)

show port security

This command displays port security status and the secure address count.
Syntax
Command Mode
Privileged Exec
Example
This example shows the port security settings and number of secure addresses for
all ports.

Table 51: show port security - display description

Field
Port Security
Port Status
Intrusion Action
show port security [interface interface]
interface - Specifies a port interface.
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
Console#show port security
Global Port Security Parameters
Secure MAC Aging Mode : Disabled
Port Security Port Summary
Port Port Security Port Status
--------------------------------------------------------------------------
Eth 1/ 1 Disabled
Eth 1/ 2 Enabled
Eth 1/ 3 Disabled
Eth 1/ 4 Disabled
Eth 1/ 5 Disabled
.
.
.
Description
The configured status (enabled or disabled).
The operational status:
◆
Secure/Down – Port security is disabled.
◆
Secure/Up – Port security is enabled.
◆
Shutdown – Port is shut down due to a response to a port security violation.
The configured intrusion response.
– 263 –
Chapter 9
Intrusion Action
Secure/Down None
Secure/Up None
Secure/Down None
Secure/Down None
Secure/Down None
| General Security Measures
Port Security
MaxMacCnt CurrMacCnt
0 2
10 0
0 0
0 0
0 0