Table of Contents
Advertisement
74–2
ON–VEHICLE INSPECTION
1.
INSPECTION SLIDING ROOF FUNCTION
(a)
Check the automatic sliding open operation.
(1)
Turn the ignition switch ON.
(2)
Slide close and tilt down the roof glass to the fully close position.
(3)
Check that the roof glass will slide open automatically and stop just before the fully open position
by pressing the sliding roof switch OPEN for 0.3 seconds or more.
(b)
Check the automatic sliding close operation.
(1)
Turn the ignition switch ON.
(2)
Check that the roof glass will slide close to the fully close position automatically by pressing the
sliding roof switch CLOSE for 0.3 seconds or more.
(3)
The roof glass will stop sliding if the sliding roof switch is turned to CLOSE or OPEN while the
glass is moving.
(c)
Check the automatic tilting UP operation.
(1)
Turn the ignition switch ON.
(2)
Slide close and tilt down the roof glass to the fully close position.
(3)
Check that the roof glass will tilt up automatically to the fully up position by pressing the sliding
roof switch UP for 0.3 seconds or more.
(d)
Check the automatic tilting DOWN operation.
(1)
Turn the ignition switch ON.
(2)
Check that the roof glass will tilt down by pressing the sliding roof switch DOWN when the roof
glass is up.
(e)
Check the operation function after key–OFF.
(1)
After turning the ignition switch from ON to OFF, check that the roof glass can be operated via
the sliding roof switch, however the operation will be impossible after the driver's or passenger's
door is opened.
(2)
When approximately 45 seconds have passed after the ignition switch is turned from ON to OFF,
check that the roof glass can not be operated via the sliding roof switch.
(3)
After turning the ignition switch from ON to OFF with the driver's or passenger's door open, check
that the AUTO operation will stop immediately.
(f)
Check the jam protection function.
NOTICE:
S
Never insert any part of your body, such as hand, in between.
S
Pay thorough attention not to get caught in there.
S
The roof might be deformed if something hard, such as a handle of hammer, is inserted in be-
tween.
HINT:
The jam protection functions during the following AUTO operations; the AUTO close or down operation and
the AUTO close or down operation after key–OFF.
(1)
Fully close the roof glass.
(2)
Set a handle of hammer around the fully close position.
HINT:
Wrap the handle well with cloth or something before setting.
2002 CAMRY REPAIR MANUAL (RM881U)
SLIDING ROOF/CONVERTIBLE
–
SLIDING ROOF SYSTEM
Author :
7403Z–02
Date :
2666
Advertisement
Table of Contents
