Recording System - Toshiba DP120F Service Manual

Scanning density:
Contrast adjustment:
Scanning speed:
Speed of reading into memory:
(A4-size document)
Maximum document size:
Minimum document size:
Document thickness:
Number of auto document
feeder capacity:

2. Recording System

Recording method:
Recording width:
DP120F/DP125F Specifications
Standard: 8 pels/mm x 3.85 lines/mm
Fine: 8 pels/mm x 7.7 lines/mm
Ultra-Fine: 16 pels/mm x 15.4 lines/mm
Standard, darker, lighter
(selectable by pressing the [CONTRAST] direct function
access key.)
1 msec./line (A4 size, 8 pels/mm x 3.85 lines/mm)
Standard: 1.2 seconds
Fine: 2.4 seconds
Ultra-Fine: 4.8 seconds
When assisted by an operator:
216 mm (width) x 1000 mm (length)
8.5" (width) x 39.4" (length)
When not assisted by an operator:
(With the document exit tray extension stretched out)
216 mm (width) x 420 mm (length)
8.5" (width) x 16.5" (length)
148 mm (width) x 100 mm (length)
5.8" (width) x 3.9" (length)
(For documents of width less than 148 mm, use a carrier
sheet.)
Single-sheet document: 0.05 to 0.15 mm (45 to 120 g/m
(For documents of thickness less than 0.06 mm, use a
carrier sheet. When using a carrier sheet, the total thick-
ness shall be 0.15 mm including the thickness of the car-
rier sheet.)
Multi-sheet document: 0.06 to 0.12 mm (50 to 100 g/m
Letter/A4: 50 sheets
Legal: 20 sheets
Plain paper recording by laser beam printer
216 mm (8.5")
2-2 March 2000 © TOSHIBA TEC
2
)
2
)