2.1.2 Operation Panel Assembly
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Open the top cover.
(2)
Remove the three screws from the operation panel assembly, and remove the operation
panel assembly.
Operation panel assembly
(3)
Disconnect the connector from CN1 on the operation panel PBA.
CN1
Operation
panel PBA
(4)
Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, perform the operation panel test referring to the "Chap-
ter 11:1.5.1 OPE. PANEL TEST" on page 11-16.
March 2000 © TOSHIBA TEC
Fig. 8-2-2
Connector
Fig. 8-2-3
8-3
DP120F/DP125F Removal/Replacement
08-02-02
08-02-03