Toshiba DP120F Service Manual page 104

1.4.4 Discard
When the received document is longer than the effective recording area length, this function
discards the excess area of the recording. Even when this Discard function is set ON, the
function will not be effective in the following cases.
A) When the exceeds area is longer than the specified value, no discarding will occur
but the recording image will be divided into multiple pages.
B) When the Discard function is set OFF, the image portion in the exceeding area will be
recorded in a separate page.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (ON or OFF), then press the
(1)
[ENTER] key.
DISCARD
1.ON
2.OFF
ON
Discards the data in the area exceeding length of the recording paper.
OFF
Does not discard such data.
(2) When the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
DP120F/DP125F Function Settings
[MENU], [4], [3], [04]
4-38 March 2000 © TOSHIBA TEC