Toshiba DP120F Service Manual page 516

(4) Move the bushing located in the rear of the paper pickup roller assembly to the front, and
remove the paper pickup roller assembly.
Collar
Bushing
(5) Reassemble the components in the reverse order of disassembly.
NOTES: • Set the collar to the paper pickup roller assembly as shown in the figure.
• When installing the paper pickup roller assembly, perform the paper pickup
solenoid gap adjustment referring to the "3.1 Paper Pickup Solenoid Gap"
on page 8-130.
DP120F/DP125F Removal/Replacement
Paper pickup roller
assembly
Fig. 8-2-122
8-96
Bushing
March 2000 © TOSHIBA TEC
08-02-122