Toshiba DP120F Service Manual page 518

2.4.25 Feeder 1 Harness
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the main block. (Refer to "2.4.20 Main Block.")
(2) Remove the eight screws from the plate, and remove the plate.
(3) Remove the two screws from the feeder 1 harness, and remove the feeder 1 harness.
(4) Reassemble the components in the reverse order of disassembly.
DP120F/DP125F Removal/Replacement
Plate
Fig. 8-2-124
Feeder 1 harness
Fig. 8-2-125
8-98
08-02-124
08-02-125
March 2000 © TOSHIBA TEC