Table of Contents
Advertisement
(5)
Disconnect the connector from CN4 on the mother PBA.
(6)
Remove the one screw from the rear side plate, and remove the hide plate.
Hide plate
Mother PBA
(7)
Release the cable and ground wire from the two cord clamps.
DP120F/DP125F Removal/Replacement
Fig. 8-2-44
Fig. 8-2-45
8-34
Mother PBA
CN4
08-02-44
Cord clamp
Cable and ground wire
08-02-45
March 2000 © TOSHIBA TEC
- Quick Links:
- Front View
Hide quick links:
Advertisement
Chapters
Table of Contents
